www.l-es.dedrop eliminators | T100 / T100E

DROP ELIMINATOR PROFILE T 100 / T100E

L-ES DROP ELIMINATOR PROFILE T 100

The one nose profile has low pressure loss and high deposit efficiency.

Mode of operation:

Deposit of liquid drops according to inertial principle. Through the bending of the profile, the liquid drops are hurled to the inner surfaces and deposited at the collecting noses. Additionally, the inner surfaces of the profiles have small, sharp-edged ridges, which deposit the residual liquid.

Field of application: Application as rectifier

The eliminator is used as rectifier at a profile distance of 20 to 30 mm at the entry of our air-washers. In air-washers with air velocities of 4.5 to 7 m/s, the profile with a distance of 20 mm is used as drop eliminator.

Materials:

Talcum-reinforced polypropylene with a long-term use temperature of about 100 degrees Celsius. For a short time, this profile can also withstand temperatures up to 130 degrees Celsius.

Pressure Loss:

The diagram beside shows the pressure loss of our profiles, depending on inflow velocity and profile distances, recommended by us. Pressure loss, depending on container type, resist remain disregarded.

Limit drop size:

Limit drops are drops of a size, which can completely be eliminated by the drop eliminator. The size of the limit drop depends on profile form, profile distance and inflow velocity, recommended by us.